Boats for sale

Accommodations

Cockpit seating for 8 + cabin with V-berth

Accommodations: 1 master cabin + WC + galley

Cabin will be furnished with beds,cupboards and whatever seen on the plans, material like bed sheets, curtains and soft material is not included in yard delivery program.

TV,VCD,Stereo included

Doors, wall, etc are completed and vessel basicly ready for charter

Sitting benches are covered with leather

Furniture - mahogany or mahogany covered

Water tabs, connections ready. The working benches of the galley and the WC are granitte.

Galley Galley delivered with working area ,1 unit 4 flame gas burner Water tabs and connections in all areas completed.

Electronics 1 unit Depth Sounder, 1 unit VHF, 1 unit GPS

Electrical Vessel consists of 12 and 220V shore connection. All living areas inside have 12 and 220V lightening. A minimal set of international Navigation Light is included on the vessel. All areas like as engine room , WC , Galley , deck have light 12 and 220V too.

Deck Frames -pine Planking - 3 coats of marine plywood glued with epoxy 2 coats of epoxy with glass fiber 6 coats of epoxy paste paint or mahogany Deck-teak or mahogany

Additional All changes can be done according to the customer's preferences. Twin engine, The H.p. or any other details on the plan can be changed. The material used in bathroom, WC or in galley can be ceramic tiles or any other material.

PICTURES ARE OF A SISTER SHIP. ONE IS CURRENTLY UNDER CONSTRUCTION.

Constructing Details:
The keel is 12 x 10 cm. (laminated pine -epoxy covered-5 coats)
Wood material of frames are pine.
The upper frames are 8 x 4 cm.
The lower frames are 4.5 x 2.5 cm.
The Planking;
(side planking above main deck and above waterline and the material of underwater line)
1st coat - 8 mm. marine plywood, glued
to frames by epoxy and screws. Then covered by epoxy again.
2nd coat-8 mm. marine plywood. affixed to the first
planking by epoxy and screws. Then covered by epoxy again.
3rd coat-epoxy fibres covered. Then sanding and cleaning
4th coat - laminated mahogany covered-12 mm.

The Deck to be covered with 15 mm marine plywood and covered with 20 mm.
Teak or Mahogany-according to the customer's preference
and white rubber or wood fastened and epoxy of 5 mm in between both coats of deck materials.

The material of the interior cabin walls marine plywood and All floors to be covered with Mahogany or Teak, white rubber or wood fastened ,too .

Not only the second hand engines are available, the brand new of any other engine is possible. Also, there are some extra options. The builder can put ice maker, A/C, or any extra the customer wants (Even a bigger one can be constructed). The builder just has to be informed about the details that the customer requires. The delivery time of this boat: Without a customer it will finish in 1.5- 2 months. The builder is working on multiple vessels. With a customer it will finish in 20-25 days.

The customer can choose not only the soft material, but also the design of the cockpit or the inside. For example, the cockpit can have a bench seat as it is seen in the pictures or can have a half circle seat. Or can have a shower at swimming platform or inside etc. A general arrangement plan of this boat is available. The customer can make some changes on it and write the details of everything.

Some other information about the boat:

Safety equipment;standard safety equipments. The others are extra.
Tanks: normally use galvanized steel and polyester tanks, but they can be any other which the client prefers.
Fuel capacity: 2 x 750 lt.
Fresh water capacity: 750 lt.
Dirty water capacity: 800 lt.

The steering system:

It can be either Joystick or hydraulic.
Bow thruster: Possible to be fitted, but not necessary for 10 m.
Pumps:3 Bilge pumps available as following : 1 unit 12/24 V automatic bilge pump , 1 unit 12/24 V manual Bilge pump , 1 unit manual 220 V bilge pump.
Dirty Water Tank emptied through a Macerator connected both to open sea and main deck valve for emptying in Marinas.
1 Unit extra fire fighting and deck wash pump 12/24 V (seawater) available on vessel.
Varnishing:use Epefones
Epoxy:use Duratek
Entertainment system:TV,VCD,Stereo system in the cabin
Navigation electronics:VHF-
Deep sounder-
GPS-

*Sometimes our customers prefer to bring the navigation electronics from their country. If the customer declares the necessary documents to the custom that they are for his boat under construction, there is no tax to be paid.*

Air cond.&heating; Possible
Generator; Possible
Cushions;Builder can supply all the cushions.
Not only the cushions or the soft material, builder can supply anything wanted for the boat.
Sun/rain Canopy/Bimini Top;Possible


Swim Platform; There is a shower in swim platform.
The length -when the platform is open-85 cm.
The width-168 cm.